Groom-X Super Power Bather Pump - professional pressure kit for animal bathing

Feel like you're using too much water, time and energy bathing your dog? Meet the Groom-X Super Power Bather Pump - a state-of-the-art solution for faster, more efficient coat care and deep cleaning with 75% less water.

The Groom-X Super Power Bather Pump makes bathing easier and more enjoyable than ever before. It does the pre-washing for you, eliminating the need to dilute and wet the coat.

This innovative washing system has a convenient spray nozzle that makes it easy to apply shampoo and water to your dogs coat. It easily handles even the toughest dirt. You do not need to use a lot of water. The Super Power Bather consists of a circulating pump, flexible hose and spray nozzle with a valve to regulate water pressure. This makes the pump ideal for smaller breeds, puppies and older animals. It is also ideal for washing sensitive areas or body parts.

Why use the Super Power Bather?

• Efficiency that saves time.

You can bathe in one step instead of three. Plus, you don't even need to soak the coat before washing, so you save a lot of time! This is useful in professional groomers.
Less dirt and shampoo residue is left in the hair/coat, making it easier to dry. Washing with Super Power Bather also makes it easier to remove loose undercoat.

• More economical

Less water and conditioner is used. One measure of shampoo is enough for the entire wash. You only use as much water as there is in the bathtub.

• No sudden temperature changes

All the water in the bath is used at a constant temperature.

• Skin-friendly bathing

Because the shampoo or conditioner can be diluted more, your pet is less likely to experience allergic reactions or irritation.

• Less hair/coat damage

Washing by hand or with a sponge rubs the coat vigorously to remove dirt. Rubbing increases the risk of tangling and damaging the hair.
Washing with the Super Power Bather Pump is much gentler and protects the coat from damage.

Benefits of the Super Power Bather circulator:

• High performance - water flow max. 100 l/min
• Specially designed for effective pet washing
• Saves up to 75% shampoo, 75% water and 50% time, compared to bathing without the Super Power Bather
• Essential for anyone looking to save time, money and energy!
• Can be used with both shampoo and conditioner
• Gentle on the coat
• Environmentally friendly

The Super Power Bather set includes:

• Circulation pump with filter
• 160cm reinforced flexible hose
• Nozzle with water pressure control valve
• Remote control button - can be wall mounted or placed on the floor (acts as a foot pedal)

Maintenance and Cleaning Instructions:

Cleaning the Super Power Bather pump is very easy. The bottom of the pump may contain hair and dirt from grooming the animal. Be sure to remove these after each wash. You can also disinfect the pump by occasionally filling the bath with water and a dash of vinegar. This will easily remove any remaining dirt and shampoo. To prevent bacteria from spreading, the pump can also be placed in a bucket filled with disinfectant. Turn the pump on, allow it to absorb the disinfectant and then turn it off. The unit and hose are then properly disinfected.

Jak używać Super Power Bather:

1. Before first use, make sure there is water in the pump. Disconnect the flexible hose and pour water into the pump (approx. 300 ml) or place it in a bucket (the water level should be at least 9 cm high). Start the pump.
2. The unit can be switched on and off using the rubber foot switch supplied. The foot switch is operated by air pressure. It can be placed on the floor or wall mounted. Press and release the button once to start the pump. Press and release again to switch the pump off.
3. Place the pump in the bath or shower. Insert the plug into the bath drain to close the water circuit. Fill the bath with water to the mark (3-5 cm). Add a small amount of shampoo to the water (about a small bottle cap, depending on the size of the dog, the type of coat and the amount of dirt). You can also use the Super
4. Power Bather pump in combination with conditioners.
5. Press the footswitch to start the pump.
6. Wash your dog's coat thoroughly by holding the nozzles about 2cm apart. Continue depending on the size of your dog and how dirty the coat is. The average time is about 5 minutes. If your dog is very dirty, switch to clean water and add another dash of shampoo.
7. If using conditioner, follow the same process as for shampoo, pouring the correct amount into clean water.
   Switch to clean water and rinse thoroughly.

Please note!
Do not use the pump if you intend to wash the coat with a medicated or anti-parasitic shampoo, which should not be diluted.